Welders Salary

Welder Hourly Pay in Spokane Valley, WA: $30.24 (2026)

Quick Answer:Hourly pay for a welder working in Spokane Valley, WA runs $30.24 at the median for 2026 — annualizing to $62,906 at a standard 2,080-hour year. Figures projected from BLS OEWS 2025 (SOC 51-4121). Weighted against Spokane Valley's regional price level (BEA RPP 107.4, 7% above national), each hour of work buys what $28.16 nationally would. A 24-hour part-time schedule grosses $37,740 per year.

$62,906
Median Annual Salary
$30.24/hr
Hourly Rate
$44,680
Entry Level (P10)
$92,495
Top Earners (P90)

Based on BLS state-level estimates · View source

Welder Hourly Rate in Spokane Valley, WA — 2026 est., based on 2025 BLS
Spokane Valley, WA welder hourly rate overview (2026 est., based on 2025 BLS)

In Spokane Valley, Washington, welders can expect a median hourly pay of $30.24, which significantly outpaces the national median of $26.87. This rate offers considerable opportunities for both full-time and part-time welders, who might work on varied projects including fabrication shop production lines and underwater welding in challenging environments. A part-time welder working three days a week could expect to maintain a satisfying income while enjoying a flexible schedule. The hourly range for welders in this region spans from $21.48 for entry-level positions to $44.47 for the most skilled and experienced welders, reflecting not only their expertise but also the demand for high-quality welding across different sectors, including aerospace, petrochemical, and construction.

About the Spokane Valley Market

Salary estimated from Washington average ($62,000) adjusted for local cost of living.

Welder Hourly Wage Breakdown

PercentileHourly RatePer 8hr Shift
Entry Level (P10)$21.48$171.87
Lower Range (P25)$25.72$205.73
Median (P50)$30.24$241.92
Upper Range (P75)$36.02$288.18
Top Earners (P90)$44.47$355.73

Estimated Annual Income by Work Schedule in Spokane Valley

Based on $30.24/hr median hourly rate · 2026 est.

Horizontal bars showing a welder in Spokane Valley earning $30.24/hr would make approximately $36,288 part-time (24 hr/wk) or $62,900 full-time (40 hr/wk).Part-Time (24 hr/wk)$36,288Reduced (32 hr/wk)$48,384Full-Time (40 hr/wk)$62,900

At $30.24/hr, a welder working full-time (40 hr/wk) in Spokane Valley, WA can expect to earn approximately $62,900 per year (2026 est.). Part-time hygienists working 24 hours per week would earn around $36,288. With a cost-of-living index of 107.40 (above the national average), these earnings may be offset by higher expenses in Spokane Valley.

Annual estimates assume 5052 working weeks per year. Actual earnings vary by employer, overtime, and benefits.

Hourly Rate Calculator

$241.92
per 8hr shift
$1,209.61
per week
$5,242
per month
$62,900
per year

Schedule Comparison in Spokane Valley

ScheduleWeeklyMonthlyAnnual
Full-Time (40 hrs)$1,209.61$5,242$62,900
Part-Time (24 hrs)$725.77$3,145$37,740
Per Diem (16 hrs)$483.84$2,097$25,160

Compare WLD Wages With Similar Roles

RoleMedian Hourly
Welder (Spokane Valley)$30.24
Machinist (National Avg)$25.72
Sheet Metal Worker (National Avg)$28.93
Industrial Machinery Mechanic (National Avg)$29.53
Boilermaker (National Avg)$35.08
Horizontal bar chart comparing welder median salary in Spokane Valley ($62,906) with Washington average ($62,221) and the US national median ($55,895).Spokane Valley$62,906Washington Avg$62,221+1.10%US National$55,895+12.54%

Welders in Spokane Valley, WA earn a median of $62,906 per year (2026 est.), which is 12.54% higher than the national median of $55,895 and 1.10% above the Washington state average of $62,221.

Welder Hourly Pay vs. Cost of Living

Working 24h/week at $30.24/hr = $37,740/year (purchasing power: $35,140).

Working 40h/week (full-time) = $62,900/year (purchasing power: $58,566).

CoL index: 107.4 (100 = national average).

2019 BLS Actual

$22.99/hr

2025 BLS Actual

$29.08/hr

2026 Current Est.

$30.24/hr

2019–2027 Growth

+36.8%

Hourly Rate Trajectory for Welders in Spokane Valley (20192027)

2019–2025: actual BLS OEWS data for this metro area. 2026+: CAGR 3.99% projection.

BLS Actual Estimated Projected
Hourly rate trajectory chart for welders in Spokane Valley. Baseline $22.99/hr in 2025, projected to $31.45/hr by 2027.$21$24$28$31$352019202020212022202320242025202620272025 BLS$22.99$23.91$25.43$25.72$26.48$32.96$29.08$30.24$31.45
YearHourly RateStatus
2019$22.99/hrActual
2020$23.91/hrActual
2021$25.43/hrActual
2022$25.72/hrActual
2023$26.48/hrActual
2024$32.96/hrActual
2025$29.08/hrActual
2026(current)$30.24/hrEstimated
2027$31.45/hrProjected

Based on 7 years of BLS OEWS metropolitan area data, the median hourly rate for welders in Spokane Valley grew 26.5% from $22.99/hr (2019) to $29.08/hr (2025). At a 3.99% projected growth rate, hourly pay is expected to reach $31.45/hr by 2027. Part-time and per-diem welders can use this multi-year trend to benchmark future contract negotiations.

Note: Historical values (20192025) are actual BLS OEWS figures for the Spokane Valley metropolitan area, sourced from annual Occupational Employment and Wage Statistics surveys. 20262026 figures are current estimates, and 2027 values are projections, calculated using a 3.99% CAGR derived from 7-year BLS historical data. Actual salaries may vary based on employer, experience, certifications, and local market conditions.

Working as an Hourly Welder in Spokane Valley

When analyzing the earning potential for welders, the opportunities for part-time work become clear. A welder working 24 hours a week could take home around $37,708 annually, significantly lower than the income of full-time welders but still a solid option for those seeking flexibility. Furthermore, per-diem welders, especially in specialized areas like pipe welding or refinery turnarounds, can earn daily stipends of $80-$175 on top of their hourly rate, allowing them to boost their earnings considerably. Welders employed in various sectors, such as structural steel fabrication or oil and gas pipeline welding, may experience differing pay rates influenced by their specific employer type. Some welders may opt for lower hourly rates in exchange for benefits like health insurance, while others might prioritize higher pay without benefits. Negotiating better hourly rates in Spokane Valley often hinges on skill certifications, experience, and the ability to demonstrate value, particularly for those holding credentials like 6G pipe certification or specialized training in nuclear welding.

Frequently Asked Questions

What is the hourly rate for welders in Spokane Valley in 2026?

The estimated 2026 median hourly rate for welders in Spokane Valley is $30.24/hour, based on estimated 2026 salary (projected from 2025 BLS data at 3.99% annual growth). Rates range from $21.48 at entry level (10th percentile) to $44.47 for experienced practitioners (90th percentile). This is 12.5% above the national average. Hourly pay varies based on practice type, patient volume, years of experience, and whether the position includes benefits.

How much do part-time welders make in Spokane Valley?

A part-time welder working 3 days per week (24 hours) in Spokane Valley earns approximately $3,145/month, or $37,740/year at the median hourly rate of $30.24. Many welders prefer part-time schedules for work-life balance, and some work at multiple practices to maximize earnings. Part-time positions may not include benefits like health insurance or retirement contributions, but typically offer higher hourly rates to compensate.

Are welders in Spokane Valley paid hourly or salary?

The majority of welders in Spokane Valley are paid hourly at a median rate of $30.24/hour. Some full-time positions at larger practices or organizations offer salaried compensation around $62,900/year, often bundled with benefits including health insurance, paid time off, retirement plans, and continuing education allowances. Hourly pay gives flexibility, while salary positions provide income stability.

How much does a full-time welder make per year in Spokane Valley?

A full-time welder working 40 hours per week (2,080 hours/year) in Spokane Valley earns approximately $62,900/year at the median hourly rate of $30.24. This is 12.5% above the national median. Top earners working full-time can reach $92,490/year at the 90th percentile rate. Overtime and weekend shifts may further increase annual earnings.

Do welders earn more per hour working part-time in Spokane Valley?

Part-time and per diem welders in Spokane Valley sometimes command higher hourly rates — up to $44.47/hour — because practices need flexible coverage for specific days or peak hours. However, part-time positions typically do not include benefits like health insurance, paid time off, or retirement contributions. When factoring in the value of benefits, full-time salaried positions may offer comparable or better total compensation despite a slightly lower hourly rate.

Related Pages

Nearby Cities in Washington

JM

Written by James Mendoza, AWS Certified Welder

Career Analyst

James has over 10 years of experience in welding. He specializes in MIG and TIG welding. He has worked in various manufacturing settings.

Clinically reviewed by Priya Singh, CWIData verified by Liam O'Connor, Welding Instructor

Methodology & Data Source

Hourly wage figures on this page are 2026 projections based on the Bureau of Labor Statistics Occupational Employment and Wage Statistics (OEWS) survey, May 2026 release. A 3.99% compound annual growth rate (CAGR), derived from 6-year national BLS wage trends, was applied to estimate current 2026 hourly rates for welders in Spokane Valley. Part-time and full-time income estimates assume consistent weekly hours and do not account for overtime, benefits, or seasonal variation.

Data Sources & Methodology

Salary data for Spokane Valley is estimated from official BLS state-level occupational wage data (2025), adjusted for regional cost-of-living differences using BEA RPP (Regional Price Parities).

View estimation methodology

2026 figures are projected from 2025 BLS data using a compound annual growth rate (CAGR) of 3.99%, derived from historical BLS wage trends for welders (SOC 51-4121).

Compiled and verified by James Mendoza, AWS Certified Welder, a licensed welder with 10+ years of clinical experience. · View source data at BLS.gov

Last verified: