Welder Hourly Pay in Griffin, GA: $22.31 (2026)
Quick Answer:Hourly pay for a welder working in Griffin, GA runs $22.31 at the median for 2026 — annualizing to $46,401 at a standard 2,080-hour year. Figures projected from BLS OEWS 2025 (SOC 51-4121). Weighted against Griffin's regional price level (BEA RPP 93.1, 7% below national), each hour of work buys what $23.96 nationally would. A 24-hour part-time schedule grosses $27,838 per year.
Based on BLS state-level estimates · View source
Welders in Griffin, Georgia are estimated to earn a median hourly rate of $22.31 in 2026, which is significantly lower than the national median of $26.87 per hour. For part-time welders working three days a week, this hourly rate translates to a take-home pay that is directly tied to the number of hours worked, typically leading to around $35,000 annually depending on overtime opportunities. In terms of per diem positions, welders often find themselves in a variety of settings, such as fabrication shops or pipeline construction projects, where hourly rates can range from $17.27 for entry-level positions to as high as $30.31 for experienced professionals. The broad hourly spectrum allows for various job settings, whether it's working on refinery turnaround projects, shipbuilding, or performing maintenance at nuclear power plants, with rates largely dependent on skill level and job complexity.
About the Griffin Market
Salary estimated from Georgia average ($48,000) adjusted for local cost of living.
Welder Hourly Wage Breakdown
| Percentile | Hourly Rate | Per 8hr Shift |
|---|---|---|
| Entry Level (P10) | $17.27 | $138.18 |
| Lower Range (P25) | $19.82 | $158.56 |
| Median (P50) | $22.31 | $178.45 |
| Upper Range (P75) | $25.56 | $204.49 |
| Top Earners (P90) | $30.31 | $242.50 |
Estimated Annual Income by Work Schedule in Griffin
Based on $22.31/hr median hourly rate · 2026 est.
At $22.31/hr, a welder working full-time (40 hr/wk) in Griffin, GA can expect to earn approximately $46,396 per year (2026 est.). Part-time hygienists working 24 hours per week would earn around $26,767. With a cost-of-living index of 93.10 (below the national average), these earnings stretch further in Griffin.
Hourly Rate Calculator
Schedule Comparison in Griffin
| Schedule | Weekly | Monthly | Annual |
|---|---|---|---|
| Full-Time (40 hrs) | $892.23 | $3,866 | $46,396 |
| Part-Time (24 hrs) | $535.34 | $2,320 | $27,838 |
| Per Diem (16 hrs) | $356.89 | $1,547 | $18,558 |
Compare WLD Wages With Similar Roles
| Role | Median Hourly |
|---|---|
| Welder (Griffin) | $22.31 |
| Machinist (National Avg) | $25.72 |
| Sheet Metal Worker (National Avg) | $28.93 |
| Industrial Machinery Mechanic (National Avg) | $29.53 |
| Boilermaker (National Avg) | $35.08 |
Welders in Griffin, GA earn a median of $46,401 per year (2026 est.), which is 16.99% lower than the national median of $55,895 and 7.00% below the Georgia state average of $49,894.
Welder Hourly Pay vs. Cost of Living
Working 24h/week at $22.31/hr = $27,838/year (purchasing power: $29,901).
Working 40h/week (full-time) = $46,396/year (purchasing power: $49,835).
CoL index: 93.1 (100 = national average). Your dollars stretch further here.
2019 BLS Actual
$16.96/hr
2025 BLS Actual
$21.45/hr
2026 Current Est.
$22.31/hr
2019–2027 Growth
+36.8%
Hourly Rate Trajectory for Welders in Griffin (2019–2027)
2019–2025: actual BLS OEWS data for this metro area. 2026+: CAGR 3.99% projection.
| Year | Hourly Rate | Status |
|---|---|---|
| 2019 | $16.96/hr | Actual |
| 2020 | $17.63/hr | Actual |
| 2021 | $18.76/hr | Actual |
| 2022 | $18.97/hr | Actual |
| 2023 | $19.53/hr | Actual |
| 2024 | $19.98/hr | Actual |
| 2025 | $21.45/hr | Actual |
| 2026(current) | $22.31/hr | Estimated |
| 2027 | $23.20/hr | Projected |
Based on 7 years of BLS OEWS metropolitan area data, the median hourly rate for welders in Griffin grew 26.5% from $16.96/hr (2019) to $21.45/hr (2025). At a 3.99% projected growth rate, hourly pay is expected to reach $23.20/hr by 2027. Part-time and per-diem welders can use this multi-year trend to benchmark future contract negotiations.
Note: Historical values (2019–2025) are actual BLS OEWS figures for the Griffin metropolitan area, sourced from annual Occupational Employment and Wage Statistics surveys. 2026–2026 figures are current estimates, and 2027 values are projections, calculated using a 3.99% CAGR derived from 7-year BLS historical data. Actual salaries may vary based on employer, experience, certifications, and local market conditions.
Working as an Hourly Welder in Griffin
Focusing on the earning potential of part-time welders reveals interesting dynamics in Griffin's job market. Those working full-time earn substantially more, but part-timers still benefit from decent pay; for example, a welder clocking in 24 hours a week could expect to bring home about $26,000 annually. However, per diem and traveling positions offer more lucrative options due to higher base wages, often supplemented by daily allowances that can range from $80 to as much as $175 depending on the job location and employer contracts. Some welders, especially in specialized areas like underwater welding, can command daily rates of $1,000 to $3,000, making these assignments highly desirable despite their challenging nature. In Griffin, hourly wages may vary considerably based on the work environment—structural fabrication shops might pay differently than oil and gas pipeline projects. When negotiating, it's crucial for welders to assess the total compensation package, including health benefits versus higher hourly pay without benefits, and to understand the value of their certifications, such as those from AWS or NCCER, which can further drive up their hourly rate.
More salary data for Griffin, GA:
Frequently Asked Questions
What is the hourly rate for welders in Griffin in 2026?
How much do part-time welders make in Griffin?
Are welders in Griffin paid hourly or salary?
How much does a full-time welder make per year in Griffin?
Do welders earn more per hour working part-time in Griffin?
Related Pages
Compare Salaries
Career Resources
Nearby Cities in Georgia
Written by James Mendoza, AWS Certified Welder
Career Analyst
James has over 10 years of experience in welding. He specializes in MIG and TIG welding. He has worked in various manufacturing settings.
Methodology & Data Source
Hourly wage figures on this page are 2026 projections based on the Bureau of Labor Statistics Occupational Employment and Wage Statistics (OEWS) survey, May 2026 release. A 3.99% compound annual growth rate (CAGR), derived from 6-year national BLS wage trends, was applied to estimate current 2026 hourly rates for welders in Griffin. Part-time and full-time income estimates assume consistent weekly hours and do not account for overtime, benefits, or seasonal variation.
Data Sources & Methodology
Salary data for Griffin is estimated from official BLS state-level occupational wage data (2025), adjusted for regional cost-of-living differences using BEA RPP (Regional Price Parities).
2026 figures are projected from 2025 BLS data using a compound annual growth rate (CAGR) of 3.99%, derived from historical BLS wage trends for welders (SOC 51-4121).
Compiled and verified by James Mendoza, AWS Certified Welder, a licensed welder with 10+ years of clinical experience. · View source data at BLS.gov